Sida 1 av 1

Motståndslödning

Postat: ons 06 nov 2019, 09:34
av Olof
Hej!

Jag funderar lite på att skaffa en apparat för motståndslödning. Är det någon som kan ge mig lite tips om vad man skall titta efter och utrustningar som visat sig fungera bra?

Tack på förhand
/Olof

Re: Motståndslödning

Postat: ons 06 nov 2019, 21:07
av Jacob
Hei, jeg bruker London Road Models sitt resistance soldering unit og det fungerer meget bra. Sammen med Carr`s "No Clean Solder Cream" (pasta) er dette en god kombinasjon.
Hilsen Knut

Resistance Soldering Unit

Resistance Soldering Unit and accessoriesDesigned by the late Mike Grey, a 4mm modeller, member of the Institution of Electrical Engineers and a senior lecturer in electrical engineering, the London Road Models RSU was first introduced in 1994. In excess of three thousand have been produced and supplied to modellers in a variety of scales from 2mm to Gauge 1, as well as professional builders and other manufacturers.

The RSU is supplied ready assembled in a purpose built case incorporating a highly specified 100VA transformer and professional quality components. Five different voltage/power settings are available by selecting the appropriate pair of connectors. The specially manufactured carbon probe holder and insulated handle is fitted with flexible silicon cable for easy handling. The case has been revised and is now manufactured from stainless steel, unlike the earlier unit shown in the photograph, which featured an enamelled cover and an aluminium front plate. The instructions supplied describe how to provide a suitable “return lead work plate” as well as other methods providing a suitable return connection with the supplied return lead, in addition to covering the basic techniques for using an RSU.

Replacement probe holder and lead sets, as well as carbon probes, are available separately. These can be found listed in the “Various” section of this website, under “Gears, motors, etc., soldering materials and tools”.

Articles on soldering techniques using the our RSU can be found in MRJ issues 74 and 82. Demonstrations of resistance soldering are often given at major finescale model railway shows. usually featuring the London Road Models RSU.

Priced at £210, the RSU is available for collection at exhibitions or delivery by Parcel Force at £13.70 (this cost is due to its weight).

Re: Motståndslödning

Postat: fre 08 nov 2019, 21:42
av Olof
Har läst på lite på nätet och London Road Models produkt verkar populär men produktionen verkar vara väldigt begränsad. Finns det några andra alternativ?

Re: Motståndslödning

Postat: lör 09 nov 2019, 09:53
av Hauk
Olof skrev: fre 08 nov 2019, 21:42 Har läst på lite på nätet och London Road Models produkt verkar populär men produktionen verkar vara väldigt begränsad. Finns det några andra alternativ?
Har selv en RSU av samme type som London Road sin. Meget fornøyd med den.

American Beauty er en stor amerikansk produsent, Micro-Mark selger dem:
https://www.micromark.com/220V-100W-Res ... ctrode-Set

Denne koster ca. USD 500 inkldert frakt til Sverige.

Micro-Mark har også en billigutgave til ca USD 170 pluss frakt, men den synes jeg ser ganske tvilsom ut.

Re: Motståndslödning

Postat: lör 09 nov 2019, 11:24
av Olof
Tack Hauk!

American Beaty ser bra ut men $500 är lite mer än Londons Roads pris på £210 plus frakt. Synd att de inte finns några fler alternativ.

Vänliga hälsningar
Olof

Re: Motståndslödning

Postat: sön 10 nov 2019, 19:51
av PeO Helgesson
Jag diskuterade detta med Julle för några år sedan. Han ansåg att 200W är vad som behövs.

@ Olof. Knappt ett par veckor kvar till Warley, där kan kanske finnas lite upplysningar.